高电流电平MOSFET的驱动

High Current Logic Level MOSFET Driver
No. AN9301 April 1994 Application Note
HIGH CURRENT LOGIC LEVEL MOSFET DRIVER
Author: John Prentice



Introduction
Although the HV400 was designed as an interface between down resistor. The input voltage should be no more than 2V
a pulse transformer and a power MOSFET, there are above pins 4 and 5 to make sure that Q1 will not turn back
applications for high current MOSFET gate drive controlled on.
by standard logic. This application note provides a method of D1
interfacing the HV400 to logic signals. It also reviews the PIN 7