dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 Rev. A2/A3 Silicon Errata

The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
(Rev. A2/A3) devices you received were found to conform
to the specifications and functionality described in the
following documents:
• DS70290 – “ dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304 Data Sheet”
• DS70157 – “ dsPIC30F/33F Programmer’s
Reference Manual”
The exceptions to the specif ications in the documents
listed above are described in this section. The specific
devices for which these exceptions are described are
listed below:
• dsPIC33FJ32GP202
• dsPIC33FJ32GP204
• dsPIC33FJ16GP304
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Rev. A2/A3 silicon is identified by performing a “Reset
and Connect” operation to the device using MPLAB
®
ICD 2 or MPLAB REAL ICE™ in-circuit emulator, with
MPLAB IDE v7.60 or later. The output window will show
a successful connection to the device specified in
Configure>Select Device. The resulting DEVREV
register values for Rev. A2/A3 silicon are 0x3001 and
0x3002, respectively.
The errata described in this document will be
addressed in future revisions of silicon.
dsPIC33FJ32GP202/204 and
dsPIC33FJ16GP304
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
Rev. A2/A3 Silicon Errata

The dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304 4. UART
(Rev. A2/A3) devices you received were found to conform The auto-baud feature measures baud rate
to the specifications and functionality described in the inaccurately for certain baud rate and clock speed
following documents: combinations.
DS70290