资料介绍
infineon IGBT EconoPACKM模块 APPLICATION
NOTE
Date: 2002-02-25 Page 1 of 5
AN-Number: AN2002-02
Mounting of
EconoPACK+ Modules
The contact surface of module and heatsink must be free from damage and contamina-
tion. A thin and uniform film of thermal grease ( typ. thickness 50 - 100 m ) should be
applied to the contact area before mounting. A recommended method is applying the
thermal grease with rollers or spatulas to the surface of the module or the heatsink. The
quality of thermal grease is sufficient if a small rim can be observed around the mounted
module. Excessive grease will be pressed o