资料介绍
infineon EasyPIM750 IGBT控制模块 APPLICATION
NOTE
Date: 2003-08-12 Page 1 of 9
AN-Number: AN2003-06
Mounting instructions for EasyPIM750
and EasyPACK750 Modules with screw
clamps
1. General information
The mounting instructions outlined below are recommended for the
safe and reliable operation of the above mentioned modules in
typical applications. The recommendations given are based on the
experiences gained during laboratory and field tests.
The EasyPIM750 and EasyPACK750 Modules are designed to
be attached to a printed circuit board (PCB), 1.6 mm ± 0.2 mm
thick.
Each module is fixed to the heat sink using one screw clamp. The
recommen