Zi-FrontPanel Operator's Manual

Zi-FrontPanel Operator's Manual
For Zi-FrontPanel and Zi-FrontPanel-4Ch
Zi 4 Channel Front Panel

Introduction
Thank you for purchasing a LeCroy Zi 4 Channel Front Panel. This device is meant for use on WavePro 7 Zi and
WaveMaster 8 Zi oscilloscopes.
After removing all parts from the packaging and preparing your oscilloscope, use the following topics to properly
connect the accessory to your instrument.

Connecting the Zi 4 Channel Front Panel to Your
Oscilloscope
1. Detach the existing front panel from your oscilloscope by sliding the detachment lever to the left. Now,
carefully pull forward on the right side of the existing front panel to remove it.




Note: While changing the front panel with your instrument powered on, the oscilloscope software
prompts