LAB_WM779 - Phase Measurements on Burst Waveforms

Performing measurements on burst waveforms is an application that shows the depth of LeCroy Oscilloscopes capabilities.
Phase Measurements on Burst Waveforms APPLICATION BRIEF
LAB-WM779

May 27, 2009 Figure 1 shows a typical burst waveform where it is desired to make a
phase measurement between channel 2 and channel 3 using a LeCroy
WavePro 715 Zi 1.5 GHz oscilloscope. The channel 2 and 3 signals could
Summary
represent the input and output of an amplifier or other transmission device.
Performing measurements on The waveform consists of a150 MHz carrier amplitude