CMU200_Datasheet_Bluetooth_25

CMU200_Datasheet_Bluetooth_25Bluetooth measurements in CMU200
General
The CMU200 was the first Bluetooth test set on the market and is the only tester which performs all measurements in full hopping, reduced hopping or non-hopping-mode. Measurements using DH1, DH3 and DH5 packets are supported. According to the Bluetooth Test Mode Specification the DUT has to be locally enabled for test mode operation. The CMU200 switches the DUT to test mode and performs a number of basic RF measurements (TX and RX).

Parallel operation for high measurement speed
Due to the high measurement speed and large memory capacity of the CMU200, transmitter and receiver measurements can be carried out simultaneously. When measurements are performed in frequency hopping mode, a great test depth is rapidly attained. Only a few seconds are requi