资料介绍
MT6601_Debug_SOP_V05MT6601 Bluetooth Debug SOP (Version 0.5)
WCP_SA 2007.07.16
MediaTek Confidential Subject to Change without Notice
MT6601 HW Debug Procedure
1.Verify voltage level of BT power includes 2.8V & 1.8V
2.Check Connection between BB&BT (1) UART TXD & RXD (2) GPIO_BT_reset & GPIO_BT_32kHz (3) EINT_BT (4) PCM pins
4-1.Check mcu\make file
3.Check Reference Frequency & Clock Setting (BT_UCTS1 & BT_URTS1)
4-2.Setup “btmtk_config.c”
4.Check BT HW Configuration File
4-3.Setup GPIO Setting in “gpio_drv.c” or “codegen.dws”
5.BT Function Power on !
MediaTek Confidential Subject to Change without Notice
1.Verify voltage level of BT power
+1V8 is generated by MT6601 internal LDO
BT_PWR=2.8V. It should be provided by external LDO or MT6318.Vmc
Remark: You can find the detailed schematic from “M