首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 嵌入式系统 > HFTA - 13.0 :低EMI辐射的外部布线设计

HFTA - 13.0 :低EMI辐射的外部布线设计

资料介绍
摘要:使用电缆损耗均衡的集成电路已启用了在互连通信系统的成本大大降低。为获得最佳性能等系统,必须最大限度地减少辐射的电缆和连接器的排放量。应指定互连各种设备的电缆和连接器,防止干扰,并防止相互影响的易感性辐射能量。这篇文章中,其中包括电缆均衡,以延长传输距离和更低的系统成本,简单的方法,减少低水平的辐射。

HFTA-13.0
Rev.2; 05/08




Designing external cabling for low EMI radiation
A similar article was published in the December, 2004 issue of Planet Analog.




Maxim Integrated Products
Designing external cabling for low EMI radiation
The advent of integrated circuits that compensate for cable loss (equalizers) allows systems to send high-
speed data over very long copper cables. The use of integrated circuits for equalization1 of cable loss has
enabled a major reduction in the cost of interconnects for communications systems. For optimum
performance, such systems must minimize any radiated emissions from the……
HFTA - 13.0 :低EMI辐射的外部布线设计
本地下载

评论