首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 嵌入式系统 > Digitally-Controlled Phase Shift Using the DS1669

Digitally-Controlled Phase Shift Using the DS1669

资料介绍
Abstract: This application brief describes how to control analog phase shift digitally using a combination of digital potentiometers and standard operational amplifiers (op amps). It is intended to serve as a design example for engineers needing to implement digital phase shift in a circuitry with no specific application. It presents common op amp phase shift configurations and how to implement them using a digital potentiometer in place of mechanical potentiometers or fixed resistors. Formulas for calculating phase shift are included in the application note.
Application Note 184
Digitally-Controlled Phase Shift
Using the DS1669
www.maxim-ic.com

CONTROLLING PHASE SHIFT DIGITALLY
Altering the phase response of a signal without changing its amplitude characteristics is commonly
performed using an allpass filter, as in Figure 1. The response of this circuit is given by




A simple phase shift circuit can be implemented using an allpass filter.
Figure 1




As the signal frequency varies from DC to infinity, the phase shift will vary from 0 to +180 degrees. You
can also see that by varying R1, the phase shift at a given frequ
标签:Maximphase-shiftopampoperationalamplifierDS1669phasecontrolopampsdigipotsdigitalpotentiometersepotsdigitalpot
Digitally-Controlled Phase Shift Using the DS1669
本地下载

评论