首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 嵌入式系统 > 1-Wire® Master Device Configuration

1-Wire® Master Device Configuration

资料介绍
Abstract: The 'family-code' embedded in the lasered ROM number of each 1-Wire device signifies a specific device type. Since each device type has different features and commands, it is imperative the 1-Wire master knows how to translate this 'family-code' into the correct commands. This document presents a method to dynamically configure the 1-Wire master to correctly communicate with a previously unknown 1-Wire device type by providing the 1-Wire master with an XML configuration file. This document was originally created to support the IEEE® 1451.4 A Smart Transducer Interface for Sensors and Actuators—Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats standards committee.
1-Wire Master Device Configuration
Mar 03, 2004

Abstract: The 'family-code' embedded in the lasered ROM number of each 1-Wire device signifies a specific device type. Since
each device type has different features and commands, it is imperative the 1-Wire master knows how to translate this 'family-code'
into the correct commands. This document presents a method to dynamically configure the 1-Wire master to correctly communicate
with a previously unknown 1-Wire device type by providing the 1-Wire master with an XML configuration file. This document was
originally created to support the IEEE 1451.4 A Smart Transducer Interface for Sensors and Actuators―Mixed-Mode
Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats standards committee.


Introduction
The 'family-code'……
标签:Maxim1-WireMasterIEEE1451.4XMLDS2430Aauto-configure
1-Wire® Master Device Configuration
本地下载

评论