ANC数据的辅助状态显示监视

ANC数据的辅助状态显示监视学习指南

Aux Status Display Monitoring of ANC Data
WFM6120/7020/7120 & WVR6020/7020/7120
Version 5.2.4 Software

How To Guide
How To Guide




Figure 1. Aux Data Status Display.



This firmware version 5.2.4 shows the presence of 3 ANC Data types selected by the user in the Auxillary Data Status display.

How To Configure Ancillary Data Types within Aux Data Status
1. Select one of the tiles (1,2,3,4) and press the Status button
2. Select FULL to make the display full screen, pressing FULL again will toggle back to FlexVu.
3. Press and hold the Status button to display the menu.
4. Move up and down the menu using the Arrow Keys or General Knob to the Display Type menu.
5. Enter the sub menu by pressing SEL and navigate to the Aux Data Status display. (Figure 1)
Note: If no ANC Data Types are conf