首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 常用文档 > Errata for PCI 2.3

Errata for PCI 2.3

资料介绍
Errata for PCI 2.3
Errata for PCI 2.3

This paper lists the known errata for the PCI Local Bus Specification Revision 2.3. If
you have found others, please mail them to techsupp@pcisig.com.


Figure 4-9 requires the following correction

The phrase "All PCI Shared Signals" should be replaced with "All PCI Shared 32-
bit Signals".

Section 4.4.3.1: Add the following clarification at the end of the first bullet

The trace length of REQ64# and ACK64# (on the 32 bit connector) are limited to
1.5 inches also.

Figure 5-1 requires the following correction

The end of the short card needs to indicate a small component-free edge similar to
the top edge of the card. Also an additional arrow needs to point to the end of the
short card indicating it has a component-free ……
标签:ErrataPCI2.3
Errata for PCI 2.3
本地下载

评论