首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 消费类电子 > 使用ADS设计放大器匹配电路

使用ADS设计放大器匹配电路

资料介绍
使用ADS设计放大器匹配电路--香港中文大学ADS应用笔记之一CHU Chun San, December 18, 2004

ADS Application Notes
Wireless Communication Laboratory Department of Electrical and Electronic Engineering Hong Kong University of Science and Technology

Impedance Matching Network Design for Amplifier to meet Gain, Input Reflection Coefficient and Stability Requirements

CHU Chun San, December 18, 2004

Introduction
This application note describes the procedure of designing the input matching network for amplifier to fulfill specific gain, input reflection coefficient and stability requirements. With the idea of conjugate matching, minimum signal reflection will occur at the input port of an amplifier and this will result in small reflection coefficient and larger gain. It is also important to make sure the amplifier is operating in stable region and os……
使用ADS设计放大器匹配电路
本地下载

评论