首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 消费类电子 > 介绍如何设计SDRAM控制器

介绍如何设计SDRAM控制器

资料介绍
sdr_sdram

White Paper SDR SDRAM Controller

Introduction
The single data rate (SDR) synchronous dynamic random access memory (SDRAM) controller provides a simplified interface to industry standard SDR SDRAM. The SDR SDRAM Controller is available in either Verilog HDL or VHDL and is optimized for the Altera APEX architecture. The SDR SDRAM Controller supports the following features:
■ ■ ■ ■ ■ ■ ■ ■ ■

Burst lengths of 1, 2, 4, or 8 data words CAS latency of 2 or 3 clock cycles 16-bit programmable refresh counter used for automatic refresh 2-chip selects for SDRAM devices Supports the NOP, READA, WRITEA, AUTO_REFRESH, PRECHARGE, ACTIVATE, BURST_STOP, and LOAD_MR commands Support for full-page mode operation Data mask line for write operations PLL to increase system performance Support for data-path
标签:sdram
介绍如何设计SDRAM控制器
本地下载

评论