首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 消费类电子 > Ripple and Noise measurement

Ripple and Noise measurement

资料介绍
Ripple and Noise measurementBTCPower

AN01

Ripple and Noise

Measuring Output Noise and Ripple
Measuring output noise and ripple requires a basic understanding of the high frequency nature of noise. Very often, ‘noise’ (as commonly measured) is actually the vector sum of common and differential mode noise. Common mode noise is common to both outputs ( i.e +OUT and -OUT) with respect to chassis or earth ground. Differential mode noise is found at one output with respect to the other. While the system load can be affected by differential mode noise, it is seldom affected by common mode noise. The common mode noise is often only created in the process of measuring the differential mode noise. Noise can be measured as root mean square (RMS) or peak to peak. Low frequency noise with a low peak to average ratio is often m
标签:RippleNoisemeasurement
Ripple and Noise measurement
本地下载

评论