首页|嵌入式系统|显示技术|模拟IC/电源|元件与制造|其他IC/制程|消费类电子|无线/通信|汽车电子|工业控制|医疗电子|测试测量
首页 > 分享下载 > 消费类电子 > Manual MTF PRO3_4 change sett...

Manual MTF PRO3_4 change sett...

资料介绍
Manual PRO 3_4_change settings for 3_axis controller9. November 2004

Short Manual PRO 3 / 4 Change Setting for 3-axis controller Changing the acceleration of the stages
1. Close the ImageMaster PRO software 2. Switch on the 3 axis controller “L-Step” and switch on “Auto” 3. Open the link on the desktop called “WIN-Commander” 4. Connect the 3 axis-controller to the PC by using this settings

Pic. 1: Start of the software Win Commander to program the 3-axis controller

TRIOPTICS GmbH Hafenstrasse 39 D-22880 Wedel, GERMANY

Phone: Fax:

+49-4103-18006-0 +49-4103-18006-20

e-mail: WWW:

info@trioptics.com http://www.trioptics.com

5. Change the acceleration to 0.25m/s2 for all three axis. The speed of the stages is not so important.

Pic. 2: change acceleration values to 0.25m/s2 6. Open hardware configuration menu for the stages

Bild 3 X-/Y……
Manual MTF PRO3_4 change sett...
本地下载

评论