CMU_Datasheet_Bluetooth

CMU_Datasheet_BluetoothBluetooth measurements in CMU200
General
The CMU200 with the Bluetooth option can set up a Bluetooth connection to a Device Under Test (DUT) via the RF interface. The CMU200 switches the DUT into test mode and performs a number of basic RF measurements (TX and RX). According to the Bluetooth Test Mode Specification the DUT has to be locally enabled for the test mode operation. All measurements can be performed in hopping-, reduced hopping- or non-hoppingmode. The CMU200 supports measurements using DH1, DH3 and DH5 packets. The coupling between the CMU200 and the DUT can be either via a cable or a coupler, depending on the implementation of the DUT.

Compliance with existing Bluetooth standards
The CMU200 is compliant with the Bluetooth core specification Ver. 1.0 B (Core specification Ver